ZEISS ClearView Technology

ZEISS ClearView Technology

ZEISS ClearView stock lenses

With the clear advantages of lower cost and fast delivery, finished single vision lenses (stock lenses) are the best-selling lens type worldwide. However, they have fallen behind in one of the most important properties for every wearer: they typically do not offer really good optics away from the centre of the lens. The demand for flatter and thinner stock lenses in particular has had a negative effect on peripheral optical performance.

Continuing its role as an innovation leader in optics, ZEISS has found a way to transfer complex freeform designs to stock lenses. The result is a finished single vision lens that is both very thin and flat and achieves excellent optics – with clear vision from the centre to the edge. Visual acuity simulations show that ZEISS ClearView lenses offer on average 3 times larger zones of excellent visual acuity compared with earlier aspheric stock lenses.[8] Blind tests show that wearers of finished single vision lenses experience clarity and visual comfort and clearly prefer ZEISS ClearView lenses over aspheric ZEISS stock lenses.

There are many different single vision lens designs

But why do many stock lenses perform so poorly in terms of peripheral optics? The answer lies in the design itself. The central power of a lens can be produced by an almost infinite range of shapes.

The choice of lens design not only makes a big difference to appearance and comfort, but also has a considerable influence on optical performance, especially in the periphery of the lens. Better optical performance across the whole lens can only be achieved through greater complexity in optimising the design (Figure 7).

CORE technology

The geometry of the eyeball differs from person to person. With strong myopia, the eye is about four millimetres longer than in an emmetropic eye. It follows that the position of the centre of rotation (CoR) also varies depending on the prescription (Figure 10). Using an accurate position of the centre of rotation plays a decisive role when optimising the lens design for the wearer's visual comfort, especially for good vision in the periphery.

ZEISS ClearView stock lenses
ZEISS decided to put the industry's long-standing practice in single vision lenses to the test and to question why wearers of single vision stock lenses could not benefit from a freeform design. In doing so, ZEISS found a way to transfer complex freeform designs to single vision stock lenses. The advanced freeform design of ZEISS ClearView lenses is based on point-by-point optimisation of the surface. The lens is optimised with 700 free parameters within a complete quadrant, which is then mirrored twice to cover the whole lens. Full optimisation of one quadrant is the maximum possible for single vision stock lenses, as the exact orientation of the lens is not known in advance (Figure 9). The result is a very flat and thin single vision stock lens with excellent optics – for clear vision from the centre to the edge.

Figure 9: Overview of the design optimisation principles for spherical, aspheric, double aspheric and ZEISS ClearView lenses.

ZEISS ClearView stock lenses offer an on average 3 times larger area of clear vision

To ensure high optical standards, the optical performance of ZEISS ClearView lenses was analysed using the ZEISS Vision Clarity Simulation. This analysis clearly shows that, across a wide range of plus and minus prescriptions, ZEISS ClearView lenses offer on average a 3 times larger zone of clearer vision compared with conventional ZEISS AS single vision stock lenses optimised with five parameters.[8] This ensures clear and more comfortable vision over a larger area of the lens for all suitable single vision wearers, and ultimately leads to greater customer satisfaction. The zone of best clear vision is defined as a continuous circular area of unblurred vision on the lens – below the threshold of just-noticeable blur. Figure 17 shows two example plots of simulated visual acuity for a ZEISS 1.60 ClearView with and without cylinder compared with a standard ZEISS 1.6 AS single vision stock lens. In this example, the ZEISS ClearView lens offers a 3 times (with cylinder) to 4 times (without cylinder) larger area of clear vision, shown as white areas.

ZEISS also tested the performance of ZEISS ClearView lenses against stock lenses from other major brand manufacturers, as shown in the charts. The improvement of ZEISS ClearView compared with aspheric and double aspheric stock lenses from other major manufacturers is very similar.[8], [9]

For easier viewing, the detailed results for minus and plus lenses are shown separately (Figure 18 and Figure 19).

Reduced optical distortion

In addition to less optical blur, ZEISS ClearView lenses also show less peripheral distortion compared with standard spherical or aspheric lenses. The lens designers compared the overall extent of distortion effects in the ZEISS ClearView design with typical single vision lenses. Based on simulations of different types of distortion that wearers typically experience, the ZEISS ClearView design showed on average over 4 percent less skew and swim distortion than a standard spherical single vision lens, and 10 percent less than an aspheric single vision lens.[11]

Thinner lenses

With ZEISS ClearView, wearers benefit not only from large areas of clear vision but also from flatter and thinner lenses. Conventional lenses, by contrast, need steeper base curves for acceptable optical performance. The freeform design with point-by-point optimisation and ZEISS ClearForm manufacturing technology make it possible to reduce the edge thickness of minus lenses. In the plus range, ZEISS ClearView 1.6 lenses are on average 8 percent thinner than spherical ZEISS single vision 1.6 stock lenses, and up to 13 percent thinner at a sphere of +5.00 dioptres (Figure 19).[12]

Flatter lens – without optical compromise

The technological advances in ZEISS ClearView allow flatter, more attractive lenses by reducing the curvature, without compromising visual acuity in the periphery. The result is lenses that are on average 36 percent flatter across all prescriptions compared with spherical ZEISS single vision 1.6 stock lenses, with up to 49 percent flatter lenses in the minus range and up to 25 percent flatter lenses in the plus range (Figure 20).[13]

In summary, across the entire range evaluated, ZEISS ClearView lenses are 36 percent flatter and up to 16 percent thinner than typical spherical single vision lenses, while offering the highest level of optical performance.